CRISTAL
Perfumed water - dilutable paint
Good breathability
It is suitable for internal spaces
Code
0884
Description
Perfumed water - based paint made of copolymers and synthetic pigments that give the product the following characteristics: high coverage, ease of application, excellent elasticity and whiteness. The dry film offers a pleasant satin appearance and it allows a perfect breathability of the surfaces.
Use
It is suitable for any internal walls
Appearance of the film
Matt
Color
White
Component
1
Hardening
Physical hardening through evaporation of water and union of the polymer
Specific weight
From 1,700 gr / ml
VOC
30 gr/ liter
Estimated yield
8 - 9 m² / litre for the smooth supports with medium absorption
Flash point
Component A > 114°C
Preparation of surfaces
New surfaces:
Make sure that the supports are completely dry. If there are molds, treat the surface with suitable restoring products.
Remove any efflorescence and paints that are peeling off with brushes and washes.
Prime the surface with a vinyl fixative product diluted in a ratio of 1 litre of insulating product with 8 - 10 litres of water.
Old surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be removed with brushes and washes.
Prime the surface with a vinyl fixative product diluted in a ratio of 1 litre of insulating product with 8 - 10 litres of water.
Make sure that the supports are completely dry. If there are molds, treat the surface with suitable restoring products.
Remove any efflorescence and paints that are peeling off with brushes and washes.
Prime the surface with a vinyl fixative product diluted in a ratio of 1 litre of insulating product with 8 - 10 litres of water.
Old surfaces:
Remove old paints that are peeling off. Tempera and lime paintings must be removed with brushes and washes.
Prime the surface with a vinyl fixative product diluted in a ratio of 1 litre of insulating product with 8 - 10 litres of water.
Preparation of the product
Mix the product before the use and add water
Component A 100
Water 1° coat 20 - 25 %
2° coat 10 - 15 %
Component A 100
Water 1° coat 20 - 25 %
2° coat 10 - 15 %
Environmental conditions
Ambient temperature: from + 5 to 40° C
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Temperature of the support: > 10° C
Humidity: 0 - 80 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 50 microns 10° C 20° C 30° C
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2 hours
Dry to touch 3 1 0,5 hours
Dry in depth 8 4 -5 2 hours
Time of overpainting
Minimum (hours) 10° C 20° C 30° C
8 4 3 hours
Maximum unlimited in the absence of contaminants
8 4 3 hours
Maximum unlimited in the absence of contaminants
Application
Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A Lt. 14 Lt. 5 Lt. 2,5