MINIOCROM

Code

0504

Description

Oil - phenolic primer that has a dual anti - corrosive chemical action (lead soaps) with barrier effect.

Use

Primer for sandblasted steel grade SA 2 or brushed steel according to grade CST3 of Sensk Standard SIS 1967. It is covered with synthetic finishes, such as “Resing”, “Toplac”, “Novolux”, “Resilux”, within seven days of application. It also provides for a slight abrasion of the surface.

Appearance of the film

matt

Colour

red

Component

1

Hardening

Physical hardening through evaporation of solvents and oxidative polymerization

Specific weight

1,520 gr/ml

Volume of solids

61 %

VOC

306 gr/ liter

Minimum thickness

40 – 50 micron

Estimated yield

15 m² / litre for a thickness of 40 microns

Flash point

Component A 34°C
thinning 34°C

Temperature resistance

100° C continuously, 140° C discontinuously

Salt spray Resistance

Thickness 80 microns 1000 hours, neither blistering, nor rust propagation

Preparation of surfaces

New steel:
SA 2 sandblasting or brushing in order to have clean surfaces
Old paints:
Brushing, dust removal

Preparation of the product

Mix the product before the use and add the thinner
Componente A 100
Synthetic thinner 5 - 10 % depending on the thickness of the dry film to be applied.

Environmental conditions

Ambient temperature:             from + 5  to  40° C
Temperature of the support:   > 10° C
Humidity:                                0 - 85 %
In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.

Drying and hardening time

For the thickness of 45 microns              10° C           20° C           30° C
Dry to touch                                              6                 3                   2    hours
Dry in depth                                            48                24                 10  hours

Time of overpainting

Minimum  (hours)                                   10° C          20° C            30° C
                                                                24              12                  6 hours
Maximum    unlimited in the absence of contaminants

Application

Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.

Shelf life

2 years in a cool and dry place (max 40° C)

Packs

Comp A lt. 2,5 lt. 0,750 thinner 1,5, 25