MUROFIX IN

Code

0637

Description

Water - dilutable stabilizing fixative based on acrylic - styrene copolymers for internal use. Since it is pigmented, it gives an initial coverage of the substrate.

Use

This product is suitable for consolidating and making uniform new and old plasters, concrete surfaces, old paints, provided they are dry and well adherent. In addition to improving the characteristics of the plaster, « MUROFIX IN » allows a better application of all wall coverings favoring the perfect anchorage..

Appearance of the film

matt

Colour

White - color chart

Component

1

Hardening

Physical hardening through evaporation of solvents and union of the polymer

Specific weight

1,370 gr/ml

Volume of solids

45,5%

VOC

15 gr/ liter

Minimum thickness

50 micron

Estimated yield

9,1 m² / litre for a thickness of 50 microns

Flash point

Component A >113°

Preparation of surfaces

Make sure that the substrate is well dry, remove by brushing any efflorescence or all parts of old paints that are peeling off. Completely remove old layers of lime or tempera paint.

Preparation of the product

Mix the product before the use

Thinning

30 - 40% with water

Environmental conditions

Ambient temperature:             from + 5  to  35° C
Temperature of the support:   > 5° C
Humidity:                                 0 - 75 %
Avoid application in the presence of surface condensation or under direct sunlight.

Drying and hardening time

At 25° C and 65 % UR
35 - 45 minutes

Time of overpainting

4 – 5 hours

Application

Brush, roller
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.

Shelf life

1 year in a cool and dry place (max 40° C)

Packs

Lt. 14 Lt. 5