Transparent product based on acrylic - styrene resins such as « Pliolite Good Year ».
Use
This product is used as a fixative insulating product for alkaline substrates before the application of emulsion or solvent - based paints. It can be used as anti - dust for concrete floors.
Appearance of the film
Semi - glossy
Colour
Semi - glossy
Component
1
Hardening
Physical hardening through evaporation of solvents
Specific weight
0,920 gr/ml
Volume of solids
20 %
VOC
600 gr/ liter
Minimum thickness
20 - 30 micron
Estimated yield
10 m² / litre for a thickness of 20 microns
Flash point
Component A 34°C Thinner 34°C
Temperature resistance
50° C continuously, 140° C discontinuously.
Preparation of surfaces
The substrates must be mature and clean
Preparation of the product
Component A 100 Product ready to use
Environmental conditions
Ambient temperature: from + 5 to 40° C Temperature of the support: > 10° C Humidity: 0 - 85 % In order to prevent the formation of condensation, it is necessary that the temperature of the substrate is at least 3° C above the dew point.
Drying and hardening time
For the thickness of 40 microns 10° C 20° C 30° C Dry to touch 2 1 0,5 hours Dry in depth 24 8 4 hours
Time of overpainting
unlimited in the absence of contaminants
Application
Brush, roller, spray If you use the brush, you have to use nylon or natural bristle brushes. If you use the roller, you have to use medium - haired rollers. For the application, it is necessary to use the method of crossing coats.