VERO LEGNO POLIURETANICO
Filler for wood
Excellent penetration
Resistant to the atmospherical agents
code
1104
Description
One - component waxy polyurethane fungicide primer
Use
« VERO LEGNO » is a fungicide primer with wax effect, a wood protection based on polyurethane resins and anti - mold additives with very low toxicity to humans. It is suitable for new, old, painted wood. It has a good penetration and it remains unchanged despite the structural changes in wood structure. The product ensures a good protection of the wood against UV rays and all agents that can cause wood degradation.
Appearance of the film
Matt
Color
Colorless and wood chart
Component
1
Hardening
Physical hardening through evaporation of the solvent and oxidative polymerization
Specific weight
0,850 gr / ml
Volume of solids
23 %
VOC
850 gr/ liter
Estimated yield
6 - 7 m² / litre for woods with medium absorption
Flash point
34°C
Preparation of surfaces
New or carried forward surfaces:
Sand in order to remove the raised wood fibers, any traces of resin must be removed with the use of a nitro thinner. Fill any imperfections, sand and remove dust.
Give a first coat of filler.
After dying, sand and give a second coat of « VERO LEGNO INCOLORE » for interior applications, three coats for exterior applications.
Already painted surfaces:
Remove old layers of paints that are peeling off and roughen the surface.
Sand any fillings and remove dust. Apply the primer as indicated above.
Sand in order to remove the raised wood fibers, any traces of resin must be removed with the use of a nitro thinner. Fill any imperfections, sand and remove dust.
Give a first coat of filler.
After dying, sand and give a second coat of « VERO LEGNO INCOLORE » for interior applications, three coats for exterior applications.
Already painted surfaces:
Remove old layers of paints that are peeling off and roughen the surface.
Sand any fillings and remove dust. Apply the primer as indicated above.
Preparation of the product
Mix the product before the use and add water
Component A 100
Synthetic thinner Product ready to use
Second coat as it is
Component A 100
Synthetic thinner Product ready to use
Second coat as it is
Environmental conditions
Ambient temperature: from + 8 to 35° C
Temperature of the support: > 5° C
Humidity: 0 - 80 %
Temperature of the support: > 5° C
Humidity: 0 - 80 %
Drying and hardening times
10° C 20° C 30° C
Dry to touch 6 3 1 hours
Dry in depth 18 10 6 hours
Dry to touch 6 3 1 hours
Dry in depth 18 10 6 hours
Time for overpainting
Minimum (hours) 10° C 20° C 30° C
18 10 6 hours
18 10 6 hours
Application
Brush, roller, spray
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
If you use the brush, you have to use nylon or natural bristle brushes.
If you use the roller, you have to use medium - haired rollers.
For the application, it is necessary to use the method of crossing coats.
Shelf life
2 years in a cool and dry place (max 40° C)
Packs
Comp A: Lt. 4 Lt. 1